-
×
Thermo-Anemometer PCE-009-ICA incl. ISO Calibration Certificate
PCE-009 thermo-anemometer with RS-232 and Software
Accurate flow meter to measure air temperature and velocity with calculation of volume of air current and RS-232 interface for data transfer to a computer, software and cable are included.
This thermo-anemometer has a good price and combines accuracy and versatility with the ability to transfer data directly to a computer. This thermo-anemometer forms a part of a professional basic equipment to regulate and test ventilation systems. The thermo-anemometer is also used in research and development projects within institutions. Its fine 8 mm / .3 in point makes possible to use it in areas with limited space to measure, such as cooling systems. When a surface area is programmed into the thermo-anemometer, it will calculate the volume of the air current in m³/min. This way the capacity of a ventilation can be easily controlled. The thermo-anemometer can be used for an air conditioning and refrigeration systems. It should be taken into account that while measuring air flow, several measurements should be taken and the average is used to represent the air flow reading.
• Measures air velocity and temperature
• Calculates air flow as well as average air flow
• Can be used for low air velocity
• Different units of measurement: m/s, km/h, ft/min, knots, miles/h
• Large LCD
• Easy to use
• Shows minimum and maximum value
• Save function for minimum and maximum values
• Auto shut-off function to protect battery life
• Has an RS-232 interface for data transfers to a computer
• Comes with a telescopic sensor, batteries, carrying case, software, RS-232 cable and user manual
Other Variants:
• Thermal anemometer PCE-009
• HVAC meter PCE-009
• Air flow meter PCE-009
• Wind speed meter PCE-009
• Air velocity meter PCE-009
• Air Velocity / Temperature Data Logger PCE-009
• Hot wire wind measurer PCE-009
Note : All the mentioned variants are available with ISO Calibrated certificate. Need to be mentioned by the time of order.
• Measurement range with corresponding unit:
- 0.2 to 20.0 m/s
- 0.0 to 50.0°C / 32 to 122°F (sensor)
• Calculation of volume of air current:
- 0 to 36,000 m³/min (CCM)
• Resolution:
- Air velocity : 0.1m/s (for remaining units, up to ft/min = 1.0)
- Air temperature : 0.1°C / 0.18°F
- Volume of air current (CCM) : 0.001 to 1m³/min (depending on reading)
• Accuracy:
- Air velocity : ±1% (of measurement range) or ±5% of the corresponding value
- Air temperature : ±0.8°C / 1.4°F
- Volume of air current (CCM) : Calculated value
• Measuring quote : From 2 sec. to 9 hours
• Internal memory : 16.000 values
• Thermal sensor:
- Telescopic thermistor
- Hot wire sensor
- Contracted length 280 mm / 11 in
- Extended length 940 mm / 37 in
- Maximum diameter 12 mm / .5 in
- Minimum diameter 8 mm / .3 in (at the leading end)
• Interface : RS-232
• Software / RS-232 cable
- Included, compatible with Windows 95, 98, 2000, XP, for data transfer
- Data can also be exported to MS Excel
• Display : Large 58 x 34 mm / 2.3 x 1.4 in LCD
• Operating conditions:
- Device : 0°C to 40°C / 32 to 104°F <80% R.H.
- Thermal sensor : 0°C to 50°C / 32 to 122°F <80% R.H.
• Power : 4 batteries (1.5V) (or by way of an optional mains adaptor of 9V)
• Auto shut-off : Yes, 5 minutes to protect battery power
• Dimensions
- Device: 203 x 76 x 38 mm / 8 x 3 x 1.5 in
- Thermal sensor: 8 mm / .3 in diameter x 940 mm / 37 in maximum extended length (only 280 mm / 11 in when contracted)
• Enclosure : ABS plastic
• Weight : 515 g / 1.1 lbs
• PCE-009 thermo-anemometer with thermal sensor and 1.5 m / 4.9 ft connector cable
• RS-232 cable
• Software
• 4 batteries
• Carrying case
• User's manual
• ISO calibration certificate
Calibration certificates are issued specifically for the customer and are excluded from the right of return.