- Welcome to Our store ADK Instruments
- Call Us: +91-9310246652
- My Account
Mini Micro Profiler
Standard 9-15 Days Delivery | Once received to our Hub
Mini micro profiler is a novel portable instrument has been designed for in-situ microsensor measurements. The micro profiler, which can be equipped with microsensors for measurements of oxygen, pH, sulphide (S -- or H2S) and temperature, is ideal for a wide range of applications including:
• Oxygen respiration.
• Benthic primary production.
• Quantification of sulphide oxidation and sulphate reduction by measurement with a sulphide (gas or ion) microsensor for use inbio-filmsand sediments.
Profiling measurements can be carried out with a spatial resolution of 50 µm in numerous locations including:
• At the sediment-water interface (from tidal flats to 100 m water depth).
• In bio-films, for studying the transformation of organic matter.
• Under ice, for studying respiration and primary production of ice-algae.
Model 1:
One Mini microprofiling system with a detachable 3-leg base, made in 4 mm acid-proof AISI 316 stainless steel. The system is furnished with 1 MCBH5M Subconn connection and 2 end-stop magnets (Neodymium) and is pressure compensated to 6000 m depth. Sensor electronics housing, housing cable, and motor control system are not included in the price.
Model 2:
One Mini microprofiling system with a detachable 3-leg base adjustable in height, made in 4 mm acid-proof AISI 316 stainless steel. The system is furnished with 1 MCBH5M Subconn connection and 2 end-stop magnets (Neodymium) and is pressure compensated to 6000 m depth. Sensor electronics housing, housing cable, and motor control system are not included.
• Weight, in air: 10 kg
• Weight, in water: 8 kg
• Total height: 1,0 m
• Distance between feet: 0,75 m
Pressure compensated sensor house (Image 5, 6 & 7):
Pressure compensated sensor house made of acrylic (PMMA) with a screw-in tightening ring in the top made of (POM) and 3 pcs. O-rings.
The bottom is protected by an AISI 316 stainless steel ring.
Tested for 800 atmospheres pressure.
Pressure stable connectors:
Gold plated, 3 or 4-pin connectors made of AISI 316 stainless steel with 3/8" UNF thread and 3 pcs. of wire, length 25 cm.
Tested for a pressure of 800 atmospheres.
Pressure stable "Dummy":
Connector made of AISI 316 stainless steel with 3/8" UNF thread.
Tested for 800 atmospheres pressure.
Camera housing:
Housing: AISI 316 stainless steel. Internal diameter: 72 mm
Length: 120 mm.
Front glass: 10 mm Acrylic (PMMA)
Max. depth: 200 m
Connector for transmission: 1 pc Subconn
Finish: Electro polish
Lamp for 12 V:
12 volt DC 35 watt lamp 38°
Housing: AISI 316 stainless steel
Finish: Electro polish
Camera housing:
Housing: AISI 316 stainless steel
Internal diameter: 50 mm
Length: 120 mm
Front glass: 10 mm Acrylic (PMMA)
Max. depth: 200 m
Connector for transmission: 1 pc Subconn
Finish: Electro polish
Datalogger box:
Housing: AISI 316 stainless steel
Internal diameter: 125 mm
Length: 340 mm
Front glass: 10 mm Acrylic (PMMA)
Max. depth: 200 m
Connector for transmission: 2 pc Subconn connectors (10 pins) (1 x BH10F-SS and 1 x BH10M-SS).
Finish: Electro polish
• One computer (Artica controller)
• Computer box
• Motor cable 25 meter
• Motor cable 50 meter
• Communication cable 3 meter
• Battery cable 3 meter
• Releaser to niskin water sampler
• Battery charger
• Sensor cable 25 meter
• Sensor cable 50 meter
• Sensor electronic house
• Holder for sensor house
• 3 Pin connector
• 4 Pin connector
• Dummy for connector
• Acrylic sensor house
• Niskin water sampler
• Transport box
• Battery box 10 Amp/h
• Battery box 15 Amp/h
• Battery box 20 Amp/h
• Battery box 30 Amp/h
• 12 V lamp
• Small video camera house, Inner diameter Ø50 mm
• Small video camera house, Inner diameter Ø72 mm
IMPORTANT : All quoted prices are subject to alterations if any changes in construction, material or delivery time is requested by the purchaser after final quoting/ordering
.png)
