Pre-alarm and full alarm / RS-485 modbus interface / Displays current wind speed and average wind speed of last 2 and 5 minutes

The PCE-WSAC 50 is an airflow meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. A pre-alarm and full alarm can be activated based on preset values. If wind speeds are higher than the preset values, a pre-alarm is first applied before the full alarm is issued. Both alarms are delivered visually and audibly. If the pre-alarm is triggered, a yellow LED will flash on the front of the unit and a beep will periodically be emitted as a warning tone. If the full alarm is triggered, a red LED will flash on the front of the unit and a beep will continuously be emitted.

The anemometer allows measurement of the slightest of wind movements. This airflow meter alarm controller is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing. If necessary, a relay can also be connected to the controller.

• Pre-alarm and full alarm with visual and audible warnings
• Allows measurement of the slightest wind movements
• Power supply: 115 V AC
• Signal input: 0 to 10 V
• Interface: RS-485 modbus
• Bright, easy-to-read LED display
• Simple to use

***Sensors sold separately***

Other variants: 
• Air flow meter PCE-WSAC 50-821
• Air velocity meter PCE-WSAC 50-821
Other variants without RS 485 modbus: 
• Air flow meter PCE-WSAC 50-810
• Air velocity meter PCE-WSAC 50-810
Note : All the mentioned variants are available with ISO Calibrated certificate. Need to be mentioned by the time of order.