-
×
Air Quality Meter PCE-COG 10
The air quality meter has a measuring range of 0 ... 9999 ppm. In addition to the carbon dioxide measurement, the air quality detector also has a carbon monoxide (CO) sensor with a measuring range of 0 ... 1000 ppm and a temperature and humidity sensor. The air quality detector already covers a large range of measuring tasks. The air quality detector is therefore used, for example, in occupational safety to check the climatic conditions in office workplaces.
During the measurement, the readings are stored on the air quality meter. Up to 5000 measuring points can be saved on the air quality detector. The CO² and CO content, as well as the temperature and humidity are saved by the air quality detector for each storage point. After a measurement run, the stored measurement values can be viewed directly on the air quality detector.
For further processing, the readings recorded by the air quality meter can be transferred to a computer. The transfer takes place via the Micro-USB interface of the air quality detector. When connecting the CO and CO² meter to a computer, it is recognized as a mass data storage device. The saved measured values are saved by the air quality detector in CSV file format and can therefore be processed directly.
The built-in 1500 mAh battery in the air quality meter enables mobile use. To charge the battery, the air quality detector can be connected to a 5 VDC power supply via the micro-USB interface. The air quality detector can continue to be used during the charging process to take measurements. For an optimal and longer-lasting measurement of the air quality detector there is a 1/4 inch connection on the back. With this connection, the air quality detector can be attached to a tripod and aligned.
Carbon monoxide (CO) | |
Measuring range* | 0 … 1000 ppm |
Resolution | 1 ppm |
Accuracy | ±5 % of measuring range |
*The CO measurement refers to an ambient condition of 0 … 40 °C / 32 … 104 °F, 15 … 95 % RH, non-condensing | |
Carbon dioxide (CO²) | |
Measuring range* | 0 … 9999 ppm |
Resolution | 1 ppm |
Accuracy | ±3 % of measured value ± 75 ppm |
*The CO² measurement refers to an ambient condition of 0 … 50 °C / 32 … 122 °F, 0 … 85 % RH, non-condensing | |
Temperature | |
Measuring range | 0 … 50 °C, 32 … 122 °F |
Resolution | 0.1 °C / °F |
Accuracy | ±2 °C / ±4 °F |
Humidity | |
Measuring range | 0 … 100 % RH |
Resolution | 0.1 % RH |
Accuracy | ±5 % between 0 … 20 % RH |
±3.5 % between 20 … 80 % RH | |
±5 % between 80 … 100 % RH | |
The humidity is based on a wind speed of 1 m/s. The accuracy is maintained after 30 minutes of acclimatization. | |
Further specifications | |
Display | 2" LC display |
Measuring rate | 1 Hz |
Memory | for 5000 measuring points |
Storage rate | 1 minute, 15 minutes, 1 hour |
Units | temperature: °C, °F, CO / CO²: ppm |
Alarm when limit values are exceeded | visually and acoustically |
Data export | CSV |
Connection | 1/4“ tripod connection |
Interface | Micro-USB for charging the battery and for data transmission. |
Power supply (battery) | 3.7 V, 1500 mAh |
Power supply (power adapter) | primary: 100 … 240 VAC, 50 / 60 Hz, 0.25 A |
secondary: 5 VDC, 1 A | |
Operating conditions | 0 … 45 °C, 32 … 113 °F, <95 % RH, non-condensing |
Storage conditions | -10 … 55 °C, 14 … 131 °F, <95 % RH, non-condensing |
Dimensions | 54 x 215 x 34 mm / 2.1 x 8.4 x 1.3" |
Weight | 154 g / 5.4 oz |
1 x Air quality meter PCE-COG 10
1 x Micro USB cable
1 x 5V DC power supply
1 x Instruction manual